The Electron Microprobe lab offers non-destructive chemical analyses of solids using a JEOL JXA-8200 Electron Probe Microanalyzer (EPMA) with an EDX detector. The microprobe is capable of quantitatively measuring the abundance of all elements from C to U using five wavelength-dispersive spectrometers (WDS) and an energy-dispersive X-Ray spectrometer (EDX) for rapid analyses. This analytical technique combines micron-scale chemical analyses with scanning electron microscopy and is capable of …

The new state-of-the-art transmission electron microscope from Thermo Fisher Scientific Themis Z brings a lot of new opportunities for the characterization of crystal structure, microstructures and chemical composition of materials. Simultaneous imaging of heavy and light elements, and atomic resolution elemental imaging allow to investigate atomic structure with sub-Angstrom resolution.

The FEI Quanta 3D FEG is a state-of-the-art Dual Beam machine combining traditional thermal emission scanning electron microscope (SEM) with focused ion beam (FIB). This combination allows the characterization of materials in 2D and 3D (tomography), TEM sample preparation (TEM Lamella), observations at the subsurface of the specimens (cross section imaging) and structural modification of sample surfaces at the micrometer to nanometer scale.
The machine features three different vacuum modes …

The Transmission Electron Microscopy TEM laboratory is a state-of-the-art facility equipped with a FEI Tecnai G2 F20 X-Twin transmission electron microscope and a FEI FIB200TEM Focused Ion Beam device for specimen preparation. The laboratory provides powerful techniques for characterization of crystal structure, microstructures and chemical composition of materials down to a near atomic level.

The Field Emission-Scanning Electron Microscope of the Zeiss Ultra Plus allows you to capture, analyze and supplement high-resolution images to get total information out of your sample. The complete detection system of the Ultra Plus combines a high-tech Gemini FE-SEM column with various detectors: the Inlens & SE-Detector for high-resolution images, the inlens Energy selective Backscatter Detector (EsB) & Annular Backscatter Detector (AsB) for impressive material contrast of any samples, and …

A scanning electron microscope (SEM) is designed for fast analytical and micro-morphological investigation of surfaces. The lab is running a JEOL JSM-6510 Scanning Electron Microscope (SEM) (W-filament, 0.5-30 kV acceleration voltage) combined with an Oxford Instrument INCAx-act detector (Energy Dispersive X-Ray spectrometer, EDX) for fast analytical and micro-morphological investigations. The maximum sample size is 32 mm in diameter; spatial resolution of the SEM down to 3 nm (30 kV). Two …

The ZELMI lab for transmission electron microscopy (S)TEM provides high-resolution images of electron-transparent samples, analyses of topography and microstructure, crystal and crystal defect analyses via EDX as well as sub-atomic resolution in HR-(S)TEM.
For high-resolution transmission electron microscopy analyses, two devices are available. The JEOL JEM-ARM300F2 "GrandARM2"is one of the most versatile and highest-resolution STEMs. The first instrument of this type outside Japan was …

The electron beam microprobe - EPMA is applied for qualitative and quantitative elemental analysis with highest spatial resolution and detection sensitivity. The electron beam microprobe is a Jeol JXA-8530F equipped with a Schottky field emission cathode primarily used for quantitative elemental analyses of high accuracy and resolution.
With the JEOL JXA-8530F, both SE and BSE recordings are possible in COMPO and TOPO modes. It is equipped with 5 WDX spectrometers for wavelength dispersive …

Focused Ion Beam Analysis are applied for high-resolution SEM images of cross-sectional surfaces and their prior target preparation, high-resolution scanning ion images (SIM) with topography and channeling contrast, and furthermore target preparation of electron transparent (S)TEM samples and lithographic processing of samples. The Focused Ion Beam (FIB) is the so-called Nano-Workbench, a dual-beam FIB/SEM instrument (Thermofisher HELIOS 600) combining a high-resolution electron microscope …

The SEM laboratory provides high-resolution images with topography and element contrast, elemental analysis with EDX, crystal analysis with EBSD and in situ analysis, e.g. tensile-pressure module.
The SEM laboratory covers conventional scanning electron microscopy (SEM), high-resolution scanning electron microscopy (HR-SEM) and low vacuum scanning electron microscopy (VP SEM) analyses.
For conventional SEM measurements the follwing devices are available: a Hitachi S-2700 scanning …