This lab is dedicated to mineral synthesis and other experiments using mostly inorganic chemistry or hydrothermal synthesis methods. The lab is equipped with standard chemical laboratory equipment such as analytical balance, centrifuge, fume hood, furnaces, hotplate stirrers, ovens, dry block heater, pH meters as well as reflux setups and sonicator bath. Hydrothermal synthesis is possible in closed Teflon lined cells heated either conductively or by microwave irradiation.

This lab is dedicated for the synthesis of redox-active iron mineral phases, as well as their interaction with redox-sensitive trace elements (e.g., As, Cr,) and anaerobic microbes, under oxygen-limited conditions. It is equipped with two anaerobic chamber workstations, setup for liquid degassing to remove O₂, sample autodiluter for trace element analysis and standard chemical laboratory equipment such as analytical balance, centrifuge, fume hood, hotplate stirrer, shaking incubator, oven and …

The hydrothermal diamond-anvil cell (HDAC) can be applied to study fluids, solids and particularly aqueous samples in situ at high pressures and temperatures. Although such cells are usually used at P-T conditions of less than 3 GPa and 850 °C, experiments with aqueous fluids to 23 GPa and 1025 °C have been reported in the literature.
Because diamonds are transparent over a large range of the electromagnetic spectrum, samples in the HDAC can in principle be studied using any "photon-in – …